Preheat.kit Topvex CB250 EL #131084
A pre-heater is available as an accessory for Systemair Topvex units with counter flow heat exchanger. The pre-heater will compensate the lack of reheater capacity during bypass de-icing.The pre-heater is connected to the Topvex Corrigo control and will be engaged only (default*) during bypass defrosting mode, to secure supply temperature. Depending of air flow and heating coil capacity the set point for the pre-heater can be set and optimized from the Corrigo control. (Set point is determined according to lack of reheater capacity during bypass de-icing.)*(optional function settings can be selected from Corrigo menu. In example, conditioned outdoor air temperature)The kit contains of 1 expansion module, 1 pre-heater, 1 outdoor air sensor and 1 instruction.
400V 3~ | |||
---|---|---|---|
Агрегат | |||
Честота | 50 | Hz | |
Напрежение (номинално) | 400 | V | |
Фази | 3~ | ||
Напрежение тип | AC | ||
Входящ ток | 13 | A | |
Входна мощност | 9.000 | W | |
Въздушен дебит | мин. 265 | m³/h | |
Тип на продукта | Електрически нагревател | ||
Връзки | |||
Тип въздуховодна връзка | Кръгъл | ||
Размер на въздуховода; Кръгъл, вход | 250 | mm | |
Размер на въздуховода; Кръгъл, изход | 250 | mm | |
Размери и тегла | |||
Тегло | 7 | kg |