AXZENT Centrifugal Fans

Low-maintenance thermo-centrifugal fan solution for duct systems

For industrial environments
Up to 120°C medium temperature, continuous operation
Energy Efficient
Spun flanges according to Eurovent 1/2

Robust

The AXZENT series combine the strengths of axial and radial fans for use in demanding professional environments. The thermal centrifugal fan for medium temperatures up to 120°C in continuous operation is reliable in operation, for simple, direct installation in the duct system.

Performance

High-performance impeller together with highly efficient motor are designed to ensure high-level performance with minimum power consumption and maximum efficiency.

Accessories

AXZENT can be selected together with variety types of accessories as Co2 and temperature controls, speed controllers, silencers, and other options.

Construction

The long casing is manufactured from pre-galvanized steel and has spun flanges according Eurovent 1/2, for direct installation in duct systems. The motor is outside the air stream.

Impeller

Depending on the type, AXZENT fans are equipped with AC or EC external rotor motors. Motors are suitable for 50Hz and 60Hz.

Motor

Depends on the model AXZENT fans are delivered with AC motor or EC motor. Motors are suitable for 50Hz and 60Hz.

Motor protection

Depending on the type, AC motors have an integrated thermal protection with manual (electrical) reset, pre-wired integral thermocontact TK or thermistor PTC with leads to a motor protection device.

Fans with EC motors have an integrated electronic thermal protection including locked-rotor protection and soft-start.

Control

EC motors with built-in potentiometer to adjust working point can be also controlled by external signal 0-10V.

EC motors, depending on the type are also equipped with ModBus communication or alarm signal.

AC motors can be controlled by 5-step, stepless speed regulator, D/Y switch or frequency converter.

Installation

The fans can be used indoor or with specific accessories also outdoor. With Spun flanges according Eurovent 1/2, for direct installation in duct systems.