An energy-saving EC Roof Fan powered by an external rotor motor
DVC-POC is the non-insulated version
DVCI-POC is the insulated version with acoustic and thermal insulation 50 mm
Integrated pressure sensor
Temperature sensor for outdoor temperature compensation
Sizes 315 up to 500 inclusive tilting device
Extensive range of accessories
Available with EC motors for 50 and 60Hz
The DVC/DVCI-POC fans areintended to use for extract air with vertical discharge.
The fans are designed to handle high volumes at medium pressure without generating excessive noise.
DVC/DVCI-POC includes a pressure regulator and a temperature sensor for external temperature compensation.
The casing made out of seawater resistant aluminium with an inside galvanised steel frame is hard-wearing. This makes the fan also suitable for coastal applications.
The combination of casing and motor construction ensures to minimize the need for maintenance of the fans and allows long continuous operation.
The sound optimized impellers together with high efficient external rotor motors are designed to ensure high-level performance to minimize power consumption and maximize efficiency.
DVC/DVCI-POC fans can be selected together with variety types of accessories as roof sockets, tilting devices, dampers,etc.
Compliant with today’s and tomorrow’s European Union rules and requirements for energy labelling and ecodesign for Energy-related Products (ErP).
Our very own environmental performance benchmark guides you toward the most sustainable solutions within our portfolio. Only products which meet a set of easily verifiable minimum requirements in terms of energy efficiency, indoor air quality, safety, and the like are entitled to receive the Green Ventiulation™ label.
The Casing is made from sea water resistant aluminium. Base frame manufactured from galvanised steel with integrated inlet cone. Integrated bird guard manufactured from powder coated, galvanised steel. Units in sizes from 315 – 500 include a tilting device to allow for quick access for review and inspection.
DVCI-POC is with 50 mm mineral wool acoustic and thermal insulation.
The DVC/DVCI-POC fans use radial impeller with backward curved blades. These are made out of polyamide (size 190 - 225) or polypropylen (from Size 315 up to 710), dynamically balanced and paired with corresponding EC external rotor motors.
DVC/DVCI-POC fans are delivered with EC motors. Motors are suitable for 50Hz and 60Hz.
Fans with EC motors have an integrated electronic thermal protection including locked-rotor protection and soft-start.
DVC/DVCI-POC with integrated pressure regulator and temperature sensor for external temperature compensation. The programming for constant pressure control can be executed with and without external temperature compensation.
Depending on the type, EC motors are also equipped by ModBus communication or alarm signal.
The DVC/DVCI-POC are for outside installation.
400V 3~ 50/60Hz | |||
---|---|---|---|
Nominal data | |||
Voltage (nominal) | 400 | V | |
Frequency | 50; 60 | Hz | |
Phases | 3~ | ||
Input power | 2,940 | W | |
Input power kW | 2.94 | kW | |
Input current | 4.4 | A | |
Impeller speed | 1,302 | rpm | |
Air flow | max 16,597 | m³/h | |
Temperature of transported air | max 55 | °C | |
Max temperature of transported air, when speed controlled | 55 | °C | |
Protection/Classification | |||
Enclosure class, motor | IP55 | ||
Insulation class | F | ||
Data according to ErP | |||
ErP ready | ErP 2018 | ||
Dimensions and weights | |||
Weight | 114 | kg | |
Others | |||
Motor type | EC |
400V 3~ 50/60Hz | |||
---|---|---|---|
Product | |||
Trade name | Systemair | ||
Product name | DVC 710-POC | ||
Ecodesign | |||
ErP compliance | 2018 | ||
Unit category | NRVU | ||
Drive | Integrated VSD | ||
Unit type | UVU | ||
Heat recovery type | None | ||
Temperature ratio (UVU) | Not applicable | ||
qv nom | 2.9967 | m³/s | |
P nom | 2.945 | kW | |
Ps nom | 639 | Pa | |
Fan efficiency | 65 | % | |
External Leakage | 0 | % | |
Sound power (LWA) | 82 | dB(A) |