NOTUS-S-200x100-M0
Serbia · Србија
Serbia · Србија
-
NOTUS-S Constant Air Volume Controllers
Constant air volume flow controller suitable for horizontal and vertical ducts
Mechanical operation
Dial control
Steel construction
Easy setpoint adjustment
NOTUS-S-200x100-M0#94813
Mechanical operation
NOTUS-S is a constant air volume flow controller with a mechanical type of operation. It requires no auxiliary energy or actuation.
Accurate volume control
NOTUS-S provides easy, dial-operated airflow control with accuracy with a maximum of 10% flow volume deviation.
A range of sizes
NOTUS-S is designed for both horizontal and vertical ducts and comes in rectangular sizes up to 600 x 600 mm.
NOTUS-S is a constant air volume flow controller with a mechanical type of operation. It does not require an auxiliary energy source or actuation to operate. It is intended to control the airflow independently of the duct air pressure in the range of 50 Pa to 1000 Pa. The constant air flow value is adjusted by a rotating dial with the range dependent on the size of the product. Adjustments can be made manually or by an electric actuator. Available in different sizes, it can be installed into both horizontal and vertical ducts.
The rectangular body of the NOTUS-S is constructed from galvanised steel sheet with 20mm flange duct connections at each end. The control damper blade is made from aluminium. The control mechanism on the outer surface of the body consists of ABS plastics levers and transmissions, steel springs, and silicone oil-filled rotary shock absorber, all covered by an ABS box.
Tech specs
Technical Data
Article name
NOTUS-S-200x100-M0
Article number
#94813
Default | |||
|---|---|---|---|
| Nominal data | |||
| Air flow(s) | 194; 524 | m³/h | |
| Air velocity | 2; 9; 11 | m/s | |
| Duct connection type | Rectangular | ||
| Dimensions and weights | |||
| Weight | 4.2 | kg | |
Performance
Dimensions
Specification
Square constant supply and exhaust air volume flow controller for direct installation in the duct system, available in sizes from 200 x 100 mm to 600 x 600 mm in 20 gradations.The housing is made of galvanized sheet steel and comes with flanges on both sides. The damper is made of aluminum. The control mechanism is located on the outside and has an ABS housing. The housing of the soundproof version is equipped with a 1.5 cm thick polymer foam and a galvanized sheet steel casing.The constant air volume controller allows the individually required air volumes to be regulated separately in the individual branches of the ventilation system.– Housing tightness according to EN 1751 Class C– Pressure range from 50 to 1000 Pa- Deviation max. ±10%VariantM0 Mechanically automatic, without auxiliary energy and without toolsM1 With 24 V motor, controlled via 0–10 V signal or 2-point controllerM2 With 230 V motor, controlled via 2-point controller - Size: 200×100- Insulation: Without insulation- Controller type: Manually- Accessories: Not selected- Airflow direction: Supply- Factory Vmin: 205 m³/h- Factory Vmax: 580 m³/h
Documentation
BIM
Loading...