APS_, APT_, APG_

AL-CFC-A

Systemair Navigation Global

Õhujaotustooted

Tooted

Estonia

Tallinn

Tartu

Systemair Estonia

The adapter ledges help to adapt the dimensions for installation of the CFC-A… box into the gypsum plaster ceilings, metal plate ceilings or into the T-bar ceilings (see ceiling type, raster in the ordering code).

The ledges are manufactured from galvanized steel sheet with the same surface finish as the one chosen for the clean filtering cassette (powder paint in RAL9003, eventually other RAL colour).

The inner opening size of the ledge corresponds to the filter dimensions in the filter cassette. The outer dimensions of the ledge correspond to the raster size of the ceiling (600 mm or 625 mm) for the metal plate and T-bar ceilings or extend 50 mm from the inner opening for the plaster board ceilings. The adapter ledge can be used only for selected sizes and types of CFC-A… in combination with selected raster and types of the suspended ceilings (see dimension table for CFC-A… filter cassettes).