F-C2_OF

Systemair Navigation Global

Tuleohutus

Tooted

Estonia

Tallinn

Tartu

Systemair Estonia

Fire dampers are passive fire protection and are designed to utilize compartmentalization to prevent the spread of toxic gases, smoke and fire. By default, F-C2 fire dampers are only supplied with spring loaded activation. In case of fire, the fire damper closes automatically when the temperature of the air in the duct reaches 72°C. The F-C2 damper closes after the melting of the thermal fuse. After the closing of the damper blade, it is mechanically locked in the closed position and can only be opened manually. The inspection can be performed via the air terminal device. F-C2-OF is equipped with wall elements (BOR-S, OV-R, KM) on both sides. It is suitable for air transfer between fire compartments.

• One product fits several resistivities

• Wall elements are part of the damper delivery

• Possibility to order with or without duct

• Saving up installation space and easy to install

• Easy inspection via the air terminal device

F-C2 fire dampers are CE certified following the Construction Products Regulation according to EN 15650:2010. Dampers are tested according to EN 1366-2:2015 and classified according to EN 13501-3 + A1:2009. The fire damper together with its installation form an inseparable part of the fire resistivity rating. F-C2 fire dampers are designed for the installations listed and described in "Installation". • Standard supporting construction in accordance with EN 1366-2:2015: up to 

• A - F-C2 damper with BOR-S wall elements

• B - F-C2 damper with OV-R wall elements

• C - F-C2 damper with KM wall elements

F-C2 have powder coated casings made from galvanized sheet metal. Blades from non-asbestos insulants and an intumescent seal, that expands in a fire situation.

BOR-S is designed for residential premises.

OV-R is suitable for better acoustic attenuation. A foam is attached to the inner side of the covers.

KM is a mesh made from an expanded metal.

Fire damper with a spring loaded blades with release by a thermal fuse link set to 72 °C.

The product contains galvanized steel, graphite fire-proof laminate, polyurethane foam. These are processed in accordance with local regulations. The product contains no hazardous substances, except for the solder in the thermofuse, which contains a milligram of lead. Calcium silicate board is used in sizes greater than 125 mm.

BOR-S is manufactured from galvanized sheet metal and powder coated to RAL9003 (signal white) as standard.

OV-R is manufactured from galvanized sheet metal and powder coated to RAL9003 (signal white) as standard.

KM is manufactured from galvanized sheet metal and powder coated to RAL9003 (signal white) as standard.

• CBR-C2: Set of 4 cover boards mandatory for dry installation of F-C2

Detailed information about other accessories is available in SystemairDESIGN in fire damper accessories section.

F-C2_OF Ümarad tuletõkkeklapid