F-C2_VA

Systemair Navigation Global

Tuleohutus

Tooted

Estonia

Tallinn

Tartu

Systemair Estonia

Fire dampers are passive fire protection and are designed to utilize compartmentalization to prevent the spread of toxic gases, smoke and fire. By default, F-C2 fire dampers are only supplied with spring loaded activation. In case of fire, the fire damper closes automatically when the temperature of the air in the duct reaches 72°C. The F-C2 damper closes after the melting of the thermal fuse. After the closing of the damper blade, it is mechanically locked in the closed position and can only be opened manually. The inspection can be performed via the air terminal device. F-C2-VA is equipped with a valve (BOR-S, BOR-R, Balance-S, Balance-E, EFF, TFF) for supply or extract air. It provides an easy and compact solution for duct penetrating a fire compartment, ended with an air terminal device.

• One product fits several resistivities

• Valves are part of the damper delivery

• Saving up installation space and easy to install

• Easy inspection via the air terminal device

F-C2 fire dampers are CE certified following the Construction Products Regulation according to EN 15650:2010. Dampers are tested according to EN 1366-2:2015 and classified according to EN 13501-3 + A1:2009. The fire damper together with its installation form an inseparable part of the fire resistivity rating. F-C2 fire dampers are designed for the installations listed and described in "Installation". • Standard supporting construction in accordance with EN 1366-2:2015: up to 

F-C2 have powder coated casings made from galvanized sheet metal. Blades from non-asbestos insulants and an intumescent seal, that expands in a fire situation.

Fire damper with a spring loaded blades with release by a thermal fuse link set to 72 °C.

The product contains galvanized steel, graphite fire-proof laminate, polyurethane foam. These are processed in accordance with local regulations. The product contains no hazardous substances, except for the solder in the thermofuse, which contains a milligram of lead. Calcium silicate board is used in sizes greater than 125 mm.

BOR-S and BOR-R are manufactured from galvanized sheet metal and powder coated to RAL9003 (signal white) as standard.

BALANCE-S and BALANCE-E are manufactured from recyclable polypropylene. This material withstands most chemicals in small concentrations. Polyether gasket.

TFF and EFF are manufactured from galvanized steel sheet. The products are powder coated to RAL9003 (signal white) as standard.

• CBR-C2: Set of 4 cover boards mandatory for dry installation of F-C2

Detailed information about other accessories is available in SystemairDESIGN in fire damper accessories section.

F-C2_VA Ümarad tuletõkkeklapid