RDR-80/15-50

RDR Vakioilmamääräsäätimet

Tämä tuote on korvattu tuotteella KCRK-1-80.
RDR-80/15-50#37293
Constant volume damper from plastic, inserted into duct
26,00 €ALV 0%
tai luo tili tehdäksesi ostoksia verkkokaupassa
Systemair DESIGN valintatyökalu

RDR-80/15-50 #37293

DescriptionRDR is a constant air volume flow controller with mechanical type of operation (no need for auxiliary energy or actuation). It is intended to control the constant air flow independently of the duct air pressure in the range of 50 Pa to 250 Pa. The constant air flow value can be set by a shifting dial within a range dependent on the size and configuration of the product. The cartridge type casing fits into the circular ducts of 80 mm up to 250 mm in diameter. Foreseen usage in residential premises, offices etc.Highlights• Easy adjustment• Simple and quick installation• Available from 80 mm to 250 mm• Self-adjusting with high precisionDesignRDR is a cartridge type controller for insertion into the circular duct. The flow control part is made from polymer material. The casing material on nominal sizes of ø 80 mm to ø 125 mm is polymer, on nominal sizes of ø 150 mm to ø 250 mm is galvanized steel. A rubber gasket on the casing secures air-tight and stable installation in the duct.The air flow volume is controlled by the system composed from a dynamic pressure reactive damper, a calibrated spring and an adjustment mechanism with a position arresting screw.The controller can operate in horizontal and in vertical installation position.

Tekniset tiedot

Tekniset tiedot

Tuotteen nimi
RDR-80/15-50
Tuotenumero
#37293
Oletusarvo
Nimellistiedot
Kanavaliitoksen tyypitPyöreä
Mitat ja painot
Paino0,14kg

Suorituskyky

Mitat

Tuotekuvaus

Constant volume flow regulator for pipe installation with mechanical operation (no auxiliary energy or actuation required). For constant air flow regardless of duct air pressure between 50 Pa and 250 Pa.The constant air flow can be adjusted with the adjustment mechanism within a certain range, which depends on the size and configuration of the product. The slide-in housing fits into round air ducts with a diameter from 80 mm to 250 mm.Slide-in controller for installation in round air ducts. The regulating element and the housing are made of polymer material. A rubber seal on the housing ensures that the duct installation is airtight and stable.The controller can be installed both horizontally and vertically. - Size: 80- Airflow Range: 15 m³/h ÷ 50 m³/h- Airflow direction: Supply

Asiakirjat

BIM

Ladataan...