MRH400-2-1.1-F400
Switzerland · Schweiz
Switzerland · Schweiz
-
MRH Tourelles
MRH 400-2-1.1-F400#9995300
Fréquence: 50 Hz
Se connecter ou créer un compte pour acheter en ligne
Certifications
Chargement en cours...
Spécifications techniques
Données techniques
Nom de l'article
MRH 400-2-1.1-F400
Numéro d'article
#9995300
400V 3~ 50Hz - Y (Star) | |||
|---|---|---|---|
| Données nominales | |||
| Tension (nominale) | 400 | V | |
| Fréquence | 50 | Hz | |
| Phases | 3~ | ||
| Puissance installée | 1'313 | W | |
| Puissance d'entrée kW | 1.313 | kW | |
| Puissance nominale à l'axe (P2) | 1.1 | kW | |
| Intensité | 2.4 | A | |
| Vitesse de rotation | 2'940 | rpm | |
| Débit d'air | max 7'100 | m³/h | |
| Température d'air maximum pendant 120mn | 400 | °C | |
| Température air en mouvement | -20 à 55 | °C | |
| Données acoustique | |||
| Niveau sonore à 10 m | 61 | dB(A) | |
| Niveau sonore à 3 m (champ libre) | 71 | dB(A) | |
| Niveau sonore à 4 m (champ libre) | 69 | dB(A) | |
| Protection/Classification | |||
| Classe d'étanchéité | IP55 | ||
| Classe d'étanchéité, moteur | IP55 | ||
| Classe d'isolation | H | ||
| Certificat | CPR 597958 | ||
| Standard EU | EN 12101-3 | ||
| Données selon ErP | |||
| Conformité ErP | Pas d'ErP pertinent | ||
| Dimensions et Poids | |||
| Conduit Circul d'aspiration | 400 | mm | |
| Poids | 259 | kg | |
| Autres | |||
| Type de connexion | Circulaire | ||
| Type de moteur | AC | ||
Logiciel de sélection
Dimensions
| Type | øD | øD1 | n x M* | A | A1 | A2 | B | B1 | B2 | GC | HF | H | H1 | SH, ~ | SV, ~ |
| MRH-AXC 400 | 400 | 450 | 8 x M8* | 1000 | 747 | 1070 | 1000 | 747 | 1050 | 1064 | 450 | 1250 | 1410 | 185 | 800 |
| *bolts | |||||||||||||||
Documentation technique
Câblage
| Diagram 1 (connection of electric motor in the fan`s service switch) |
| Electric motor with P2<=4 kW in Y or D connection |
| Lock the switch in position ON to prevent unintended switch OFF (lock is not in scope of delivery) |
| Diagram 2 (connection of actuator in the actuator`s service switch) |
| * 24VDC (+30/-20%) |
| ** NO/NC are intended to control position of actuator`s service switch (ON - OFF) |
| Warning: the control voltage 24VDC to open or close hatch cover should apply max. 6 minutes. |
| This is to ensure by control system (use actuator`s internal floating limit switches as indication of cover position to cut off the control voltage). More see instructions (current, intermittence). |
| The connection cable to service switch calculate with max. 1V voltage drop at max. load! |
| Operating mode for peak load at 25°C ambient: S2 1 min |
| Operating mode for continuous load at 40°C ambient: S3 5% (example: open in 30s, then wait 9min 30s) |
| Max. current of actuator(s) at SL 1000 (rated MRH load): |
| MRH 400-630: 4A |
| MRH 710-800: 6A |
| MRH 1000: 8A |
| MRH 1120-1250: 2x8A=16A |
| Diagram 3 (connection of actuator`s internal floating limit switches in the actuator`s service switch) |
| *** drawn position - closed hatch |
| 1-2 opened, 2-3 closed in closed hatch position |
| 1-2 closed, 2-3 opened in opened hatch position |
| 1-2 closed, 2-3 closed in any intermediary position of the hatch cover |
| 1-2, 4-5 opened, 2-3, 5-6 closed in closed hatch position (MRH 1120-1250 only) |
| 1-2, 4-5 closed, 2-3, 5-6 opened in opened hatch position (MRH 1120-1250 only) |
| 1-2, 4-5 closed, 2-3, 5-6 closed in any intermediary position of the hatch cover (MRH 1120-1250 only) |
| Potentialfree NC contacts, load capacity 24VDC/1A |
| Functions of the actuator`s service switch: |
| Position 0: stop (NO - opened contact, NC - closed contact) - SAFETY POSITION |
| Position 1: open hatch cover (NO - closed contact, NC - opened contact) - WARNING! |
| Position 2: close hatch cover (NO - opened contact, NC - closed contact) - DANGER! |