OPTIMA-S-PC_GM

Systemair Navigation Global

Contacts

Grilles et Diffuseurs (Ventilation et Traitement d’air)

Produits

Morocco

Systemair Morocco

OPTIMA-S-PC...GM is a compact variable pressure controller with or without an insulation. The product is intended to control the air pressure in a ventilation system. The product is installed into rectangular ducts. Field of application is e.g. offices, public spaces, laboratories, industrial plants and health care premises.

• Damper tightness class 4 according to EN 1751

• Casing tightness class C according to EN 1751

• High measurement/control accuracy error range 5% of the measured value

• Static sensor capable of measurement also in dust polluted atmosphere

• Insulated version OPTIMA-SI-PC…GM with external insulation for sound reduction

: Gruner 327V VAV Compact, pressure range 500 Pa with dynamic sensor, Modbus-RTU port for communication of all variables, analog setpoint and feedback signals DC 0 (2) V … 10 V applicable

OPTIMA-S-PC…GM is manufactured from galvanized steel sheet. The product consists of a casing, a duct connection with a flange, damper blades with rubber gaskets and a compact pressure control device. OPTIMA-SI-PC…GM is equipped by an insulation for sound reduction. The insulation is a 19 mm thick closed cell foam mat, protected by galvanized steel sheet. The compact pressure control device consists of polyurethane measurement tubes for connection to the pressure impulse tapping spots, an air pressure transmitter, a compact controller / actuator unit.

OPTIMA-S-PC_GM Registres VAV