OPTIMA-S-PC_BM

OPTIMA-S-PC-BM

Systemair Navigation Global

Salgs- og leveringsbetingelser

Privatlivspolitik

Prisliste

Nyhedsbrev

Branche-EPD

Luftfordelingsprodukter

Produkter

Denmark

Systemair Danmark

OPTIMA-S-PC is a variable pressure controller with or without an insulation. The product is intended to control the air pressure in a ventilation system. The product is installed into rectangular ducts. Field of application is e.g. offices, public spaces, laboratories, industrial plants and health care premises.

• Damper tightness class 4 according to EN 1751

• Casing tightness class C according to EN 1751

• High measurement/control accuracy, deviation 5 %

• Static sensor capable of measurement also in dust poluted atmosphere

• Actuators with quick transition or safety positioning function available

• Insulated version OPTIMA-SI-PC...BM with external insulation for sound reduction

: Belimo VRU-M1-BAC, pressure range up to 600 Pa with static sensor. Modbus-RTU or BACnet MS/TP switchable port for communication of all variables, analog setpoint and feedback signals DC 0 (2) V … 10 V applicable

: Actuator with short transition time and electric safety function

: Actuator with mechanical safety function – spring return

OPTIMA-S-PC…BM is manufactured from galvanized steel sheet. The product consists of a casing, a duct connection, with flange a multiple damper blades with a rubber gasket and a modular pressure control device. OPTIMA-SI-PC…BM is equipped by an insulation for sound reduction. The insulation is a 19 mm thick closed cell foam mat, protected by galvanized steel sheet. The modular pressure control device consists of polyurethane measurement tubes for connection to the pressure impulse tapping spots, an air pressure transmitter, a modular control unit and an actuator.

OPTIMA-S-PC_BM VAV-spjæld