VVKR-F-125-600-8-B-SW
Qatar · قطر
Qatar · قطر
-
VVKR-F Swirl Diffusers
Square swirl diffuser suitable for T-bar suspended ceiling installation
Simple design
Easy installation
Variable air discharge
Excellent induction rate
VVKR-F-125-600-8-B-SW#229532
Easy installation
The VVKR-F square swirl diffuser has a simple and safe design that facilitates easy installation and handling.
Direct connection
The WVKR-F is operable without a plenum box by direct connection to the duct bend or tee.
Well-balanced
The diffuser has a well-balanced ratio between airflow capacity, pressure drop and sound generation.
The VVKR-F is a square swirl diffuser complete with adjustable deflectors. Available in different sizes, it is designed for easy installation in T-bar suspended ceilings. It has a wide range of applications and is typically installed in offices, schools, medical premises, public halls, reception areas and corridors. It is intended for air supply and can eventually also be used for air extract. The recommended installation height is up to 4 m.
The VVKR-F has an excellent induction rate even at low airflow volumes and provides a well-balanced ratio between airflow capacity, pressure drop and sound generation. The VVKR-F is made from galvanised steel sheet with a powder paint surface finish. It consists of the backing box, which has a circular duct connection and the front plate with adjustable polymer deflectors. The outer shape of the backing box had been designed to fit into T-bar ceiling frames. The front plate can be opened or detached easily without tools via a folding ear on the edge of the plate.
Certifications
Loading...
Tech specs
Technical Data
Article name
VVKR-F-125-600-8-B-SW
Article number
#229532
| Nominal data | |||
|---|---|---|---|
| Air flow(s) | 46; 71; 90 | m³/h | |
| Duct connection type | Circular | ||
| Pressure drop | 3; 7; 11 | Pa | |
| Sound power level | 24; 29; 34 | dB(A) | |
| Sound pressure level (10 m² room absorbtion area) | 20; 25; 30 | dB(A) | |
| Dimensions and weights | |||
| Weight | 4.91 | kg | |
Performance
Flow Pattern
Dimensions
Specification
Swirl diffuser with manually adjustable louvers. For T-profile grid ceilings with 600 mm or 625 mm grid. The diffuser is designed for supply air but can also be used for exhaust air. It consists of a front panel with slats and a support casing with a connection piece and lip seal.The diffuser is made of galvanized sheet steel and is powder-coated in RAL9003 (signal white) as standard. It is available with connection sizes/number of slats Ø 125/8, Ø 160/16, Ø 200/24, and Ø 250/32.The front diffuser is attached to the support casing with a removable cable.Concealed penetration for measuring tubes during commissioningFront panel can be dismantled without toolsFront panel completely removableIt is characterized by:* Simple and safe design, easy installation and handling* Can also be used without a junction box, can be installed directly on elbows or Tee connectors* Variable air distribution patterns can be adjusted from the outside without tools* Low space requirement* Well balanced ratio between air flow rate, pressure loss, and noise generation* Excellent induction rate even at low air flows - Size: 125- Number of deflectors: 8- T-bar Ceiling Raster: 600- Accessories: Not selected- Discharge: Radial air flow- Airflow direction: Supply
Documentation
BIM
Loading...