S-BM2
Qatar · قطر
Qatar · قطر
-
S-BM2 Rectangular Smoke Control Dampers
Quickly removes toxic gases, smoke, and fire or deliver fresh air to fire compartments
Battery installation of up to 4 dampers
Can be installed into walls, ceilings or on ducts.
MA – manual intervention classified
Multi – usage in compartments classified as “Multi” and "Single"
30 minutes cycled in fire? No problem: HOT 400/30 welcome
Leakage class 3C as standard
Installation of 4 dampers as one
Installation into wall up to 4 dampers into one battery installation
Easy to set up
The S-BM2’s front board surfaces come fitted with threaded inserts making it easy to fit grilles or sheet metal duct flanges. In addition, the mechanism and actuator are enclosed by the damper casing and two covers on each side.
Resistivity to the fullest
As manual intervention "MA" classified smoke control damper the S-BM2 can operate even when fully enclosed in fire. Up to first 25 minutes you can still change the SHEVS setup. This "MA" classified damper can be utilized as "AA" classified smoke control damper.
Built for performance
S-BM2 smoke control dampers are made from sturdy galvanized sheet metal, calcium silicate board, and fireproof carbon fiberglass – all non-hazardous substances to help further prevent the spread of smoke and fire.
S-BM2 Smoke control dampers are CE certified following the Construction Products Regulation according to EN 12101-8. Tested according to EN 1366-10, EN 1366-2 and classified according to EN 13501-4.
S-BM2's body length is only 240 mm and has no blade overhangs. The pressure level is 2 thus presents under-pressure limit of 1000 Pa and overpressure of 300 Pa.
The smoke control damper together with its installation form an inseparable part of the fire resistivity rating.
Tech specs
Features
Materials
S-BM2 is made of galvanized sheet metal, calcium silicate board, fireproof carbon fiberglass, polyurethane foam, and alkaline earth silicate wool.
Casing
The casing is made from non-asbestos calcium silicate board. Casing tightness is Class C according to EN 1751.
Seals
The closed damper is sealed by silicate wool to prevent the spread of heat and smoke.
Blades
Made from non-asbestos calcium silicate board with polyurethane foam seals. Blade tightness is Class 3 according to EN 1751.
Specification
##AT Text for Systemair – smoke extraction damper S-BM2 MultiSquare 200 x 425 to 1000 x 1225 mm maintenance-free smoke extraction damper S-BM2 made of calcium silicate. Can be attached to ventilation ducts or used for free air flow.The housing and butterfly disc are composed of abrasion-resistant, asbestos-free calcium silicate. It includes a rubber seal and an intumescent seal that expands in the event of a fire.Fire rated for up to 120 minutes.Suitable for dry and wet installation in solid and lightweight walls, as well as in fire walls and outside of walls. Complies with the European product standard DIN EN 12101-8 Fire protection tested according to DIN EN 1366-10 Classification according to EN 13501-4 MA – Manual activation of the desired end position for up to 25 minutes in the event of smoke extraction Manufacturer’s declaration of performance All smoke extraction dampers are DIN EN 1751-rated at air-tightness class 3/C (for damper/housing). Very short face-to-face dimension of 242 mm including grille With assembly aid for fixing the smoke extraction damper during installation Narrow damper blade, resulting in excellent physical and acoustic properties.The actuator consists of either:– a reversible 24 or 230 V motor– Optionally also available with bus module.Type: S-BM2-400x425-– 00 = This version can be connected at both ends of the duct– 01 = End grille galvanized on one side– 02 = End grille in RAL9003 on one side– 11 = End grille galvanized on both sides– 22 = End grille in RAL9003 on both sidesOther accessories:o K1-S-BM2 = Cover plates for duct installation - Width: 125- Height: 325- Grille: 00 - No grille (not possible to mount grille on the damper)- Activation Type: B230 (AC 230V Belimo Actuator)- Installation method: Not selected- Accessories: Not selected- Airflow direction: Supply