Electrical duct heater for standard rectangular ducts
Compact design
Horizontal or vertical installation
Standard flanges for easy installation
Double overheating protection
Duct heater available in wide range of sizes up to 1000×500mm and power capacities.
The electrical duct heater is manufactured from aluzinc-coated sheet steel with a heating element in stainless steel.
The electrical duct heater has a 20 mm flanges for fitting to standard rectangular ducts and designed for installation in both a horizontal or vertical position.
The duct heater is equipped with two integrated protections (one with automatic reset and one with manual reset), to prevent overheating in case of a fault in the system.
PH Topvex 15kW 700x400 #235134
The pre-heater is controlled from the integrated control system in the Topvex unit, Systemair Access, with a dedicated pre-heater function offering set point to actual needs.A pre-heater is available as an accessory for selected Topvex units. The pre-heater can be used to lift the inlet temperature into the air handling unit. The pre-heater will act with supporting capacity during conditions as by pass defrosting or during low outdoor temperatures, to secure desired supply temperature.
400V 3~ | |||
---|---|---|---|
Nominal data | |||
Voltage (nominal) | 400 | V | |
Voltage type | AC | ||
Frequency | 50 | Hz | |
Phases | 3~ | ||
Input power | 15,000 | W | |
Input power kW | 15 | kW | |
Input current | 21.7 | A | |
Air flow | 1,512 to 10,080 | m³/h | |
Ambient and duct temperature | |||
Permitted ambient temperature | max 30 | °C | |
Dimensions and weights | |||
Duct dimension, inlet (height x width) | 400 x 700 | mm | |
Duct dimension, outlet (height x width) | 400 x 700 | mm | |
Weight | 25.45 | kg | |
Others | |||
Duct cooler/heater | Electric heater | ||
Duct connection type | Rectangular |