F-R60K Circular Fire Dampers

Exceptional performance meets easy installation.

Fire resistivity EI60S and CE certified.
Exceptionally low pressure drop
Tightness class 3C even with equipped thermal fuse.

Reducing time

Make a better use of your valuable time. Shortening time spent on product & installation selection up to construction works & maintenance time.

Feel free

Kit length on the dampers body stands out only 100 mm from the wall. Allowing you to break free from constrains endured by conventional damper body lengths.

Installation simplified

There is just one easy way to install the damper on a great range of standard constructions and non-standard constructions, as shaft walls. Remotely from these constructions are installations also that easy.

F-R60K fire dampers are CE certified following the Construction Products Regulation according to EN 15650:2010. Tested according to EN 1366-2:2015 and classified according to EN 13501-3 + A1:2009.

The fire damper together with its installation form an inseparable part of the fire resistivity rating.

F-R60K fire dampers are designed for the installations listed and described in their Handbook.

Casing

Made from sturdy galvanised steel. Casing leakage according to EN 1751 class C.

Kit

Kit manufactured from sturdy casted vermiculite.

Blades

Made from non-asbestos calcium silicate board with polyurethane foam seals for cold smoke and come with an intumescent seal that expands in case of fire. Leakage class 3 according to EN 1751.

Activation types

Be it small installation or an advanced project. Our range of activation types will help you succeed.