AXC-H Axiálventilátorok

Magas nyomású axiálventilátorok

Nagy statikus nyomásemelés
Az online Axial Fans Configurator programunkkal könnyen méretezhető és egyedi igény szerint konfigurálható
Minősített mérőlaboratóriumban ellenőrzött teljesítmény

High pressure

With its large hub ratio and integrated guide vane, the AXC-H achieves high pressures at high volume flow and great efficiency.

Application

The AXC-H is an axial fan ideal for industrial and process applications and provides effective extraction in operating temperatures up to 55°C continuously.

Performance

The fan can be configured to suit the individual operating point. Therefore, the pitch angle is adjusted in the factory. This provides a wide range of performance and high flexibility in the selection. A guide vane is included for higher pressure and efficiency.

Sturdy and dependable design

Corrosion-proof aluminum impellers, IE3 high-efficiency motors and a hot-dip galvanized steel casing ensure high quality and a long life time.

Flexibility

On request AXC-H fans can be customized with the following options:

Wide range of accessories
Various coating colors
Special motor versions e.g. up to 100°C, with corrosion protection C5 or for other voltages
FAT for projects
Different positions for the terminal boxes
X-ray tested blades and hubs

Tested according to ISO 5801 and AMCA 210

The AXC-H axial fans have been performance tested in accordance with ISO 5801 and AMCA 210 standards on the Systemair or AMCA fan test rig.

Axial fan at its best for industrial and process applications

AXC-H

Ensure maximum performance with the Systemair high-pressure axial fan, which offers a larger hub ratio and an integrated guide vane. Improve efficiency in high pressure and high volume flow applications!

Space saving

Smaller dimensions for high pressures - ideal for applications with limited space.

High efficiency

Efficiencies up to 78%. Broad range of excellent efficiency.

Reduced sound level

Operating points can be achieved with a 4-pole AXC-H instead of a 2-pole medium pressure fan. This allows lower sound levels.

Cost savings

Smaller sizes sufficient to reach operating points. AXC-H can replace double stage fans.

Accessories

The AXC-H is compatible with almost the complete range of AXC accessories. Whether electrical or mechanical accessories, you will find the right solution for your project requirement in the extensive product range.

Our new high-pressure axial fan is an evolution of our proven technology that addresses our customers’ needs. With higher pressures, improved efficiency values and a wide range of accessories, we offer our customers a high-performance solution for demanding industrial process applications.
Simon Ott
Product Manager Axial Fans

Systemair Configurator for axial fans

Our High-pressure axial fans (AXC-H) are available in our selection programme.

Visit the Systemair Configurator

Construction

The casing is made from hot-dip galvanised steel according to ISO 1461 with pre-drilled flanges. The terminal box with IP 65 is mounted outside on the casing.

Impeller

The impellers are made of aluminum and are dynamically balanced in accordance with ISO 21940-11, balancing quality G6,3, and vibration limits according to ISO 14694.

Motor

Standard models are driven by three-phase AC motors with efficiency IE3 suitable for 50Hz.

Motor protection

The motors are equipped with PTC thermistors for motor protection.

Control

Motors can be speed controlled by frequency inverter between 10 and 60 Hz.

Installation

The AXC fans can be installed in different positions indoor and outdoor (for more information see the manual).

Recommended accessories: flexible connections, vibration dampers, mounting feet.