Preheat. kit Topvex CB250 EL #131084
A pre-heater is available as an accessory for Systemair Topvex units with counter flow heat exchanger. The pre-heater will compensate the lack of reheater capacity during bypass de-icing.The pre-heater is connected to the Topvex Corrigo control and will be engaged only (default*) during bypass defrosting mode, to secure supply temperature. Depending of air flow and heating coil capacity the set point for the pre-heater can be set and optimized from the Corrigo control. (Set point is determined according to lack of reheater capacity during bypass de-icing.)*(optional function settings can be selected from Corrigo menu. In example, conditioned outdoor air temperature)The kit contains of 1 expansion module, 1 pre-heater, 1 outdoor air sensor and 1 instruction.
400V 3~ | |||
---|---|---|---|
Naprava | |||
Frekvenca | 50 | Hz | |
Napetost (nominalna) | 400 | V | |
Faze | 3~ | ||
Tip napetosti | AC | ||
Priključni tok | 13 | A | |
Priključna moč | 9.000 | W | |
Pretok zraka | min. 265 | m³/h | |
Tip produkta | Električni grelnik | ||
Priključki | |||
Tip kanalskega priključka | Okrogel | ||
Dimenzije kanala; Okrogel, vstop | 250 | mm | |
Dimenzije kanla; Okrogel, izstop | 250 | mm | |
Dimenzije in teža | |||
Teža | 7 | kg |