VVKN-A-R-300-SW
Hungary · Magyarország
Hungary · Magyarország
-
VVKN-A-R Perdületes anemosztátok
Swirl diffuser suitable for ventilation and supplying cold or warm air
Galvanised steel
Easy installation
Fixed blades
Air supply or extract
VVKN-A-R-300-SW#217892
Air duct installation
The VVKN series of swirl diffusers can be installed onto an air duct using a plenum box with a horizontal or vertical connection.
Flexible use
The VVKN-A-R can be used for ventilation as well as supplying cold or warm air.
Galvanised steel
The diffuser face is made of galvanised steel.
The VVKN-A-R is a fixed blade swirl diffuser that allows comfortable air distribution. It is designed for installation onto an air duct using a plenum box with a horizontal or vertical connection by a flexible circular tube or the SPIRO duct. Available in different sizes, the VVKN-A-R can be used for air supply and extraction. It can be used for ventilation, as well as supply cold or warm air. The diffuser face is supplied with a radially aligned set of variously shaped vents. This can guarantee an even distribution of swirl supply air into the occupied zone.
The diffuser face of the VVKN-A-R is made of galvanised steel. It’s also possible to manufacture from stainless steel AISI304 or AISI316. The surface is powder-painted with a white RAL 9003 paint by default, other RAL types can be applied upon request. The diffuser is most commonly installed onto a ventilation duct and is designed for easy installation.
Tanúsítványok
Betöltés...
Műsz. spec.
Műszaki adatok
Tétel neve
VVKN-A-R-300-SW
Cikkszám
#217892
Alapértelmezett | |||
|---|---|---|---|
| Névleges adatok | |||
| Légmennyiség(ek) | 94; 120; 150 | m³/h | |
| Légcsatorna csatlakozás típusa | Köralakú | ||
| Nyomásesés | 6; 10; 15 | Pa | |
| Hangteljesítmény szint | 24; 29; 34 | dB(A) | |
| Hangnyomásszint (10 m² hangelnyelésű szoba) | 20; 25; 30 | dB(A) | |
| Méretek és tömegek | |||
| Tömeg | 0.7 | kg | |
Teljesítmény
Áramláskép
Méretek
Specifikáció
Ceiling swirl diffusers with fixed slats and a round front panel. Straight or curved louvers. Can be used as a supply and exhaust diffuser in comfort zones. Diffuser for highly induced swirl-shaped horizontal airflow. The front panel is installed on a junction box (sold separately) with a top or side connection piece. Available sizes from Ø 300 to Ø 625 mm.High induction for a rapid reduction of the supply air temperature difference and air velocityMaterial:The diffuser is supplied with a round front plate made of galvanized sheet steel. The surface is powder-coated in signal white (RAL9003) as standard; the front panel can be painted in other RAL colors on request. We can also supply a stainless-steel version in AISI304 or AISI316 without surface treatment. The outlet is attached to a central cross member in the junction box using a central screw. A screw with a white decorative cap and a self-adhesive seal are included.DesignFront panel round (R)Slats straight (A) - Size: 300- Plenum box: PB-VVK-R- Spigot size: 160- Connection position: Horizontal connection (from the side)- Insulation: Without insulation- Airflow direction: Supply
Dokumentáció
BIM
Betöltés...