AXC(F) - G Axialfläktar

Smoke extract axial fan AXC(F)-G:⁻ Certified according to EN 12101-3 for 400°C/120 min. ⁻ CE mark of conformity.⁻ Suitable for use inside or outside the fire zone. Temperature of medium for continuous operation from -20°C up to 55°C. Air direction from motor to impeller.⁻ Two unidirectionally rotating fans mounted in series for higher pressure.Impeller:⁻ The adjustable blade angle allows flexible and exact adjustment to the desired working point with optimum efficiency. The blade angle is pre-set in the factory. ⁻ Impellers with profiled blades made of cast aluminum alloy.⁻ Dynamically balanced according to ISO 21940-11 and ISO 14694, balancing quality G6,3.Casing:⁻ Manufactured from hot-dip galvanized sheet steel according to ISO 1461. ⁻ Pre-drilled, rolled Eurovent 1/2 flanges pressed on both sides provide additional stability. ⁻ Pre-wired terminal box on fan casing for easy electrical connection, IP65 (IEC 60034-5).⁻ Includes bolt-on outlet guide vanes which increases fan pressure and efficiency (for PV version).Motor:⁻ Motor suitable for 400°C/120min or 55°C continuous operation.⁻ High efficiency three-phase asynchronous motors with squirrel cage rotor, directly in the air stream.⁻ Protection class IP55 (IEC 60034-5), insulation class H. ⁻ The motors can be equipped with PTC thermistors for motor protection (on request). ⁻ Single and two-speed motors are available. ⁻ Speed controllable via frequency converter, suitable for turn down to 10Hz.The AXC(F)-G axial fans have been tested in Systemair’s AMCA certified Laboratory according to ISO 5801 and AMCA 210.